Top9 Ideal cadence for cycling / ant+ bike sensor garmin Our expert selection

Track and capture real-time cycling cadence on your bike computer or smartphone with compatible training apps. Lightweight and easy to install – NO MAGNETS. Attaches to your bike’s crank arm or shoe (mounts included). Integrated with Bluetooth and ANT+, RPM sensors connect to smartphones, tablets, and bike computers by Wahoo, Polar, Garmin, and more. Record workout data with the Wahoo Fitness app and automatically upload data to your favorite training platform like Strava. Works with 50+ Smartphone Apps including Wahoo Fitness, Zwift, Trainerroad, Sufferfest, MapMyRide, Komoot, RideWithGPS, Cyclemeter, Peloton (iOS only), Rouvy, Fulgaz, Kinomap

The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. The odometer feature — for the speed sensor only — tracks your distance to help plan for bicycle maintenance.

Use the Magene S3+ sensor to accurately track cycling cadence or speed in real-time. Connects to your ANT+ & Bluetooth 4.0 devices to provide key data in your favorite cycling apps. Check out the manual for helpful setup tips. Use the Magene Utility App for initial setup. Then the S3+ is compatible with most ANT+ & Bluetooth 4.0 devices. Works with Zwift, Garmin, Bryton, iGPSPORT, Onelap, BKool, TACX, and more. Bluetooth connection works with smartphones & bike computers. Send us a message on Amazon if you'd like to confirm compatibility with your device. Lightweight design Installs easily on your bike's crank arm or wheel hub with the included rubber-elastic rings. Connect the sensor to the crank arm for cadence tracking, or to the wheel hub for speed measurements. Note: Sensor can't be installed on the wheel of spin bikes, so speed tracking is not compatible with spinning bikes. Sensor can be used as a cadence or speed sensor. Just reinsert the battery to quicky changes modes. The green light means speed mode, and the red indicates cadence tracking. Want to track both at once? Grab a 2 pack and record both cadence and speed. Simultaneously record data on multiple devices with this cadence/speed sensor. Data transmits in 3 seconds to keep you informed while riding. Track all your rides with the 400-500h battery life. IP66 rating makes this sensor water and dust-proof.

The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. ANT+ connectivity and BLUETOOTH Low Energy technology let you send cadence data to our Garmin Connect online community and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors. Compatible with multiple Garmin devices.

The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin connect online community or self-calibrate with an edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. Ant+ connectivity and Bluetooth Low energy technology Let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors. The odometer feature tracks your distance to help plan for bicycle maintenance.

【Auto Wake-up Function】Automatically wakes from sleep mode upon sensing vibration in the bicycle. Bright LCD display to easily view ride statistics. 【Multi-functions】Small size, light weight, wireless, waterproof design makes it convenient and durable. This bicycle computer measures speed, distance, and riding time. Exactly what any serious bicyclist or fitness fanatic needs to know for stats tracking. 【Day & Night Backlight 】Provides backlight for easy viewing during dark hours. The backlight will automatically turn on when any button is pressed between 18:00 and 06:00. Please note the slight rattle sound from device is normal phenomenon, which results from the design of wireless automatic function. 【Easy to Install &Use】Simple installation that only takes a few minutes. Easy to navigate interface with only two buttons to access all measurements. Customizable to most common tyre sizes for accurate stats tracking. 【Applicable】Road bicycles, mountain bikes, folding bikes,and other common bicycles are compatible with this bicycle computer. This bicycle computer MAY NOT be compatible with some electric-assist bicycles. If the computer display, sensor, and magnet can be installed within the specified distances device should be fully compatible. Please do not hesitate to contact us with any questions.

Performance GPS cycling computer with mapping. Compatible with Vector (power meter). Power meter compatible (displays power data from compatible third-party ANT+-enabled power meters) Dynamic performance monitoring provides insights on your VO2 max, recovery, training balance, heat and altitude acclimation, nutrition, hydration and more when paired with compatible sensors Cycling safety features include new bike alarm, group messaging and tracking, assistance and compatibility with Variant rearview radar and lights so you can see and be seen (when device is paired with your compatible smartphone) Includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus off-course recalculation and back to start; mountain biking model has integrated Trail forks data, including trail difficulty ratings Customize with free apps, widgets and data fields from the Connect IQ Store MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time Battery life: up to 20 hours with GPS; works with Garmin Charge power pack for up to 40 hours of additional battery life

SPEED SENSOR & CADENCE SENSOR- Package include: 2 pcs speed &cadence, you can use the speed and cadence sensor at the same time. BLUETOOTH & ANT+ MULTI-PROTOCOL: Supports all kinds of equipments and applications which collect speed or cadence data via Bluetooth or ANT+ ULTRA SMALL DESIGN & LONG ENDURANCE: SIZE only 38mm×29.5mm×9.5mm & WEIGHT only 9.2g. Not affect bike appearance and increase cycling burden.300 hours using time & 300 days standby time. It will enter the SLEEP MODE when not in motion. DUAL-MODE SENSOR: Quickly switch between cadence and speed sensor modes by toggling switch to different position. EASY INSTALLATION: Easily attach to your bike with included ELASTIC and DOUBLE-SIDED TAPE, no magnet or calibration needed. Excelsior quality and innovative design help you ride scientifically and healthily. Mounts to any bike's wheel hub, these sensors are easy to install, maintain and move between bikes.

[Battery] Remove the insulating sheet of the pre-installed battery before usage; re-install the battery to switch between the speed and cadence mode. [Mode] 1 sensor can ONLY select one mode (Speed or Cadence) at the one time.So you need 2 sensors to test both speed and cadence.(1 for speed,1 for cadence) [Device] When using the Bluetooth protocol 1 sensor can ONLY connect to 1 APP or device concurrently; When using ANT+ protocol it can be connected to multiple devices at the same time. [Connection] When using a smart phone APP, you need to search for the sensor in the APP, searching through the phone system’s Bluetooth setting is invalid. [Hibernation] S3+ sensor will automatically enter the sleep state for 1 minute to save power after the sensor is stationary, the sensor will ONLY start sending broadcasts after it is properly woken-up.

RPM Cycling Sensor - Track and capture real-time cycling cadence or speed data on your bike computer or smartphone with compatible training apps Cadence or Speed Sensor – Reput the battery, it will switch between rpm cadence and speed mode. Cadence sensor attaches on crank, blue LED will light up for three seconds on the panel. Speed sensor mounts on the axle with red LED light up for three seconds on panel. Two modes CAN NOT function at the same time Bluetooth & Ant+ Connectivity - Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Waterproof IP67 App Compatible & Battery Life - Work with popular training app including Zwift, Rouvy, RidewithGPS, Peloton, Openrider, TrainerRoad. CR2032 replaceable coin cell battery. Lasts up to 12 months. No recharging Lightweight and Non-Magnetic – Total weight is 9.5g only, easy to install. It comes with rubber pad and different size O-ring to help you better fix it on bike. Wireless and non-magnetic, it wouldn't be recommended to use on SPIN bikes